Product Description
1. The frame adopts the mega structure and numerical control welding.
2. The engine is imported Cummins Euro III emission engine. It has the characteristics of low noise, energy saving and environmental protection.
3. The drive axle adopts imported main drive axle with reliable quality; the "anti-skid differential" is installed inside, so that the grader can output full load power under various working conditions.
4. The operation hydraulic system adopts the load sensitive operation hydraulic system, which can make the left and right lifting of the blade synchronous, make the operation sensitive and reliable, and reduce the energy consumption at the same time. Adopt imported multi way valve and plunger pump with reliable quality.
5. The brake system consists of service brake, parking brake and emergency brake. The service brake is located at each middle and rear wheel. The left and right independent brake circuits and two accumulators ensure reliable braking force in case of failure or engine shutdown. Service brake type: oil cooled, multi disc brake, hydraulic brake, spring release, automatic adjustment.
Product Show
Specifications
| Engine |
|
| Model |
CUMMINS |
| Type |
Six-cylinder,water-cooled,turbocharged,electronic injection,tier III |
| Rated power |
228KW |
| Rated speed |
2100rpm |
| Transmission System |
|
| Torque conveter type |
3 elements, single stage |
| Torque ratio |
2.8 |
| Cooling type |
Oil cooled, pressure circulation |
| Gearbox type |
Power shift |
| Gear shifts(Forward/Reverse)Travelling speed(km/h) |
F6/R3 |
| Forward/Reverse I |
5.2/5.2 |
| Forward/Reverse II |
8.1/12.5 |
| Forward/Reverse III |
12.5/27.1 |
| Forward IV |
19.1 |
| Forward V |
27.1 |
| Forward VI |
40 |
| Steering System |
|
| Front wheel steering angle |
50º(L/R) |
| Articulated steering angle |
27º(L/R) |
| Drive type |
Dual action cylinder |
| Axle |
|
| Drive type |
Four wheel drive(6×4) |
| Front axle ground clearance |
670mm |
| Front wheel lean |
17º(L/R) |
| Oscillation |
±15º |
| Drive axle |
Imported No-SPIN differentia |
| Working Equipment |
|
| Control system |
Hydrostatic drive system |
| Hydraulic pump |
Gear pump |
| Control valve |
Two sets, five pieces per set |
| Control pressure |
25MPa |
| Hydraulic oil cylinder |
Dual action cylinder |
| Max. tractive force |
165KN |
| Ground penetration |
470mm |
| Blade width |
4920mm |
| Blade cycling |
360º |
| Max. bank cutting angle |
80º(L/R) |
| Operating weight |
26000kg |
| Braking System |
|
| Service brake |
Wet brake,actuate 4 rear wheels |
| Parking brake |
Hand operated hoop brake |
| Dimensions |
|
| Overall length |
10500mm |
| Overall width(wheel outside) |
3140mm |
| Overall height |
3650mm |
| Wheel base |
7760mm |
| Front tread |
2494mm |
| Rear tread |
2494mm |
| Tyre size |
18.00-25 |
| Service Capacities |
|
| Fuel tank |
380L |
| Engine crank case |
30L |
| Hydraulic tank |
130L |
| Gear box |
45L |
| Rear axle |
35L |
| Balance box |
40L(each) |
| Worm gear case |
6L |
| Tandem Drive |
|
| Type |
Swing type with roller chain transmission |
| Speed ratio |
18.03 |
Why Choose us
Sinoway treat Service as a significant segment in our value chain, from the moment you get in touch with Sinoway, our commitment to service is a complete guarantee that we will make every effort to be there for you. That is our pledge to you. We wish to not just satisfy but surpass the expectations of our customers.
| Condition |
Brand new |
| Warranty |
One year or 2000 working hours, whichever is earlier |
| Shipment Term |
FOB, CFR, CIF, CIP, DAF |
Audited Supplier 
){kind=link}