| Customization: | Available |
|---|---|
| Certification: | ISO |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
♠ Electro-hydraulic control power shift gearbox, 6 gears forward and 3 gears backward.
♠ Internationalized hydraulic fittings, reliable operation.
♠ The action of spade is controlled by full hydraulic pressure.
♠ The rear axle is a three-stage drive axle equipped with NO-SPIN self-locking differential.
♠ The control platform and seat can be adjusted, the control handle and instrument are arranged reasonably, the use is convenient, and the driving comfort is improved.
♠ The cab is luxurious and beautiful, with wide vision and good sealing.
♠ It can be equipped with front bulldozer, back looser, front looser rake and automatic leveling device.
| Engine | |
| Model | CAT licensed C6121 |
| Type | Direct injection, turbocharged, water cooled |
| Rated power | 162KW |
| Rated speed | 2200rpm |
| Rated fuel consumption | 230g/Kw. h |
| Transmission System | |
| Type | 3 elements, single stage(ZF licensed) |
| Torque ratio | 1.94 |
| Cooling type | Oil cooling, pressure circulation |
| Gearbox type | Power shift(ZF licensed) |
| Gear shifts( Forward/reverse) | F6/R3 |
| Traveling speed(km/h) | |
| Forward/Reverse I | 6.8/6.8 |
| Forward/Reverse II | 10.3/15.3 |
| Forward/Reverse III | 15.3/32 |
| Forward IV | 22.7 |
| Forward V | 32 |
| Forward VI | 47 |
| Axle | |
| Drive type | Four wheel drive(6X4) |
| Front axle ground clearance | 610 mm |
| Front wheel lean | 32°(L/R) |
| Oscillation | ±15° |
| Drive axle | Imported No SPIN differential |
| Steering System | |
| Front wheel steering angle | 49°(L/R) |
| Turning radius | 10.4m(non leant wheel) 10.9m(leant wheel) |
| Articulated steering angle | 26°(L/R) |
| Drive type | Dual action cylinder |
| Working Equipment | |
| Control system | Hydrostatic drive system |
| Hydraulic pump | High pressure gear pump |
| Control valve | HUSCO |
| Control pressure | 18MPa |
| Hydraulic oil cylinder | HYUNDAI |
| Max. tractive force | 85KN |
| Ground penetration | 535 mm |
| Blade width | 4320 mm |
| Blade cycling | 360° |
| Max. bank cutting angle | 90°(L/R) |
| Braking System | |
| Service brake | Hydraulic assisted and inner-expanding brake |
| Parking brake | Mechanical and inner-expanding brake |
| Dimensions | |
| Overall length | 8990 mm |
| Overall width(wheel outside) | 2600 mm |
| Overall height | 3370 mm |
| Wheel base | 6100 mm |
| Front tread | 2120 mm |
| Rear tread | 2120 mm |
| Tyre size | 17.5-25 |
| Service Capacities | |
| Fuel tank | 350L |
| Engine crank case | 27L |
| Hydraulic tank | 70L |
| Gear box | 45L |
| Rear axles | 18L |
| Balance box | 42L(each) |
| Worm gear case | 3L |
| Tandem Drive | |
| Type | Swing type with roller chain transmission |
| Speed ratio | 18.03 |
){kind=link}