SWD7S Bulldozer Main Advantages
Cummins electronically controlled engine meets the third stage emission requirements of national non-road machinery. It is intelligent, efficient, versatile and low maintenance cost.
Hydraulic mechanical torque converter uses external shunt machinery and hydraulic output, which has the characteristics of hydraulic transmission that can automatically adapt to the change of load and good mechanical transmission performance, and improves transmission efficiency.
Power shift gearbox adopts planetary wheel structure, which has high transmission efficiency. The gearbox clutch adopts multi-plate wet type, oil pressure combination, spring separation, pressure oil lubrication and cooling clutch.
Steering and braking clutch are adjustable-free, wet multi-plate clutch. Brake clutch is often combined and steering clutch is often separated. A lock brake device is designed to keep the whole machine in braking state when starting the engine, which enhances the safety of the whole machine.
The final drive is a two-stage planetary deceleration mechanism, which is installed outside the steering and braking clutch. The combined chain teeth have compact structure. When repairing the final transmission, it is not necessary to open the crawler and the walking frame, so it is convenient to repair, disassemble and assemble.
The driving sprocket is separated from the walking frame and arranged on the same axis as the final drive and steering brake clutch. The tracked track is triangular, eliminating the impact load directly transmitted from the ground to the driving sprocket, and increasing the service life of the transmission system by 30%.
The modular design of transmission parts reduces the link of assembly station and facilitates disassembly and maintenance.
The semi-rigid suspension device is used in the walking system, and the pivot type is used to replace the traditional eight-shaped beam structure, which improves the connection stiffness between the traveling frame and the frame.The cylinder of the working device is arranged near the vertical ground of the fuselage, which improves the shoveling force of the shovel cutter and reduces the pressure of the system. The oblique support structure makes the shovel blade close to the fuselage, precisely bulldozes and controls the load.
Work device pilot control, overall lifting device operation reliability, effectively reduce the low failure rate. Manipulation is labor-saving, action is sensitive, feel is soft, reduce the labor intensity of operators.
The newly developed cab has upgraded its interior in an all-round way, and has been strengthened in sealing, shock absorption and noise control to improve driver comfort. Selection of integrated imported instrumentation, automobile-like design, abandon the original circular individual instrumentation, display information is broader and clearer.
More humanized air conditioning layout and system are adopted to improve driver's comfort.
Product Show
Specifications
| Engine |
|
| Model |
Cummins |
| Type |
Six-cylinder,water-cooled
turbocharged,mechanical injection |
| Rated power |
169KW |
| Rated speed |
1800rpm |
| Implement Hydraulic System |
|
| Hydraulic flow rate |
194L/min |
| Hydraulic pressure |
18.6MPa |
| Pump type |
High pressure gear pump |
| Control valve |
Hydraulic operated pilot control |
| Under Carriage System |
|
| Sprocket |
Elevated |
| Number of track rollers (each side) |
7 |
| Number of carrier rollers (each side) |
(4 single, 3 double) |
| Number of front idler (each side) |
12 |
| Track type |
Single grouser |
| Track tension |
Hydraulic |
| Track pitch |
220mm |
| Track width |
760mm |
| Number of track shoes (each side) |
46 |
| Track length on ground |
3655mm |
| Ground clearance |
404mm |
| Main Technical Specification |
|
| Operating weight(without ripper) |
24500Kg |
| Ground pressure(without ripper) |
0.0053MPa |
| Grade ability |
58% |
| Overall dimensions (L×W×H, without ripper) |
6220×4382×3482mm |
| Max. tractive force |
280KN |
| Working Equipment |
|
| Blade type |
Side-tipping |
| Width |
4382mm |
| Height |
1350mm |
| Max. digging depth |
500mm |
| Max. lift above ground |
1170mm |
| Tilting angle |
9° |
| Blade capacity |
7.4m3 |
| Transmission System |
|
| Torque converter |
Power separating
hydraulic mechanical type |
| Transmission assembly |
Integrated bevel gear,
multiple stage planetary gear box,
speed changing control valve, |
| Final drive |
Two stage planetary
reduction gear mechanism |
| Gear shifts(Forward/Reverse) |
F3/R3 |
| Travelling speed(km/h) |
|
| Forward/Reverse I |
3.9/4.8 |
| Forward/Reverse II |
6.5/8.2 |
| Forward/Reverse III |
10.9/13.2 |
| Main Features |
|
| Special elevated sprocket, triangle shaped track |
|
| Power separating hydraulic-mechanical torque |
|
| converter |
|
| Assembly-designed transmission, easy service |
|
| and maintenance |
|
| Three-stage alarm electron monitor system |
|
| Pivot-type articulating system |
|
| ROPS cab |
|
| Steering Clutch And Brake |
|
| Steering clutch |
|
| Oil-type, free-adjustment, multiple disc, pressed |
|
| hydraulically |
|
| Steering brake |
|
| Pressed by spring, separated hydraulically, |
|
| costant meshed type |
|
| Service Capacities |
|
| Fuel tank |
450L |
| Water tank |
118L |
| Implement oil tank |
100L |
| Optional |
|
| Angle, U-blade |
|
| Air conditioner |
|
Production Line
Service Support
Sinoway treat Service as a significant segment in our value chain. All of our service-related businesses-aftermarket parts, technical support, training, OEM Solutions are based on offering more professional service, extending the life of each machine we delivered.
For special key projects and VIP customers, Sinoway offer on-site field service for a certain period, to allow the team of our users with a better understanding on the operating and maintenance, to help training the service team of their own, or give a proposal on the maintenance solutions according to the special operating environment. With the field service, we are confident to enable our machinery reduce the downtime at maximum and help our clients fulfill the project smoothly and on time.
| Condition |
Brand New |
| Warranty |
One year or 2000 working hours, whichever comes earlier. |
| Shipment Terms |
FOB, CFR, CIF, CIP DAF |
| Company Name |
Sinoway Industrial (Shanghai) Co.,Ltd |
| Add |
30 A1, No.58, New Jinqiao Road ,Shanghai, China |
| Tel |
+86 21 68598616 |
| Fax |
+86 21 50191951 |
| Website |
sinoway-sh.en.made-in-china.com |
Audited Supplier 
){kind=link}