Overall dimensions (l× W× H) 5416× 3297× 3160 mm (straight); 5566× 3726× 3160 mm (angle
Operation weight 17.8t(straight); 18.2t(angle )
Flywheel power: 121kw
Max. Drawbar pull 139.6 kn (straight); 142.7kn (angle)
Ground pressure (at operating weight): 69kpa
Min. Ground radium: 3.9 m
Min. Ground clearance: 352.5 mm
Grade ability: Straight 30° Side 25°
Type: Straight line, water-cooled, with four stroke, pressure boost and direct injection
Cylinders number-bore diameter× Travel distance 6-126× 130mm
Displacement: 9.726 l
Rated rpm 1800 r/min
Rated power: 130 kw
Max. Torque: 870 n· M/1200-1300 rpm
Fuel consumption (at rated working condition): 225 g /kw· H
Oil consumption: 1.8 g /kw· H
Admissible altitude≤ 4000m
Cooling method: Closed circulation water cooled
Starting method: Electrically starting at 24v pressure
Main clutch and transmission
Clutch tyep: Constantly disengaged with muti-powder-metal discs, which is operted by hydraulically boosting, .
Transmission type mechanical double levels controlled with constantly meshed helical gears, and coupling sleeve shift. It has five speeds forwars and four speeds reverse.
First speed forward, reverse: 2.5km/h, 3.5km/h
Second speed forward, reverse: 3.3km/h; 4.6km/h
Third speed forward, reverse: 5.7km/h; 7.9m /h
Fourth speed forward, reverse: 7.5km/h; 10.5km/h
Fifth speed forward: 10.61km/h
Type: Tighten by pressured springs and separated hydraulically with oil-type, multi-powder-metal discs.
Type: Oil, two-direction floating band with mechanism foot pedals, hydraulic boosted. The steering and braking can be actuated in one control.
Type: Double reduction with spur gear and segment sprocket, which are sealed by floating oil seal for easy service.
Type: Inner and outer beam of track roller frame are rectangular section " " frame. Track roller, carrier roller, idler are mounted with long life well sealed duo-cone floating ring well sealed duo-cone floating ring seal.
Track roller (each side): singe flange 4; Double flange 2
Carrier roller(each side): 2
Idler (each side) 1
Type of track: Single grouser combined
Tension mode of track: Hydraulic
Number of shoes(each side): 38 pieces
Width of shoe: 500mm
Length of track on ground: 2570mm
Implement hydraulic system
Type: Wo group gear pump, pilot valve, main valve, cylinders, oil filter and lines.
Pump type two group gear oil pump
Pump flow: Front pump: 190l /min pilot pump: 19l /min
System pressure: 12mpa
Radiator and diesel engine water: 60
Lubricating system of diesel engine oil: 25 (g128), 20( wd615)
Flywheel house, main clutch oil: 35
Transmission, bevel gear case oil: 95
Final drive(each side) oil 24
Implement hydraulic system oil: 80
Fuel tank oil: 285
Idle track roller, carrier roller, front idler(each) oil: 0.35
Max digging depth: 400mm
Max. Ground clearance: L1000mm
Vertical tilting angle: 9°