Highlights of SINOWAY SWG165 Motor Grader
1. The frame adopts overall hot pressing and numerical control welding.
2. Cummins engine is specially used for construction machinery. Good power, stable quality, all over the country service outlets, easy maintenance. It has the characteristics of low noise and energy saving.
3. The three-stage drive axle is equipped with our patent "nospin non slip differential", which enables the grader to output full load power under various working conditions.
4. The operation hydraulic system adopts double pump and double circuit system, equipped with American control valve, with simple structure, which can realize synchronous speed of left and right lifting oil cylinders and simplify driver's operation.
5. Adopt full hydraulic brake system, equipped with original imported brake valve and pressure limiting valve. Make the brake safe and reliable.
6. The full hydraulic front wheel steering system is equipped with a road sense full hydraulic steering gear. The steering operation is light and responsive, which improves the driver's driving safety. And equipped with the hydraulic steering control frame, so that the turning radius is small, flexible.
7. The operation device is equipped with the company's patented structure of "gear ring of hobbing plate", which is maintenance free and improves the leveling accuracy.
Product Show
Specifications
| Engine |
|
| Model |
Cummins 6BTA5.9 |
| Type |
Six-cylinder,water-cooled,turbocharged, aftercooled, mechanical injection |
| Rated power |
132KW |
| Rated speed |
2300rpm |
| Transmission System |
|
| Torque conveter type |
3 elements, single stage |
| Torque ratio |
1.5~3 |
| Cooling type |
Oil cooled, pressure circulation |
| Gearbox type |
Power shift |
| Gear shifts(Forward/Reverse)Travelling speed(km/h) |
F6/R3 |
| Forward/Reverse I |
5.31/5.31 |
| Forward/Reverse II |
8.21/13.33 |
| Forward/Reverse III |
13.33/30.55 |
| Forward IV |
20.47 |
| Forward V |
30.55 |
| Forward VI |
44.9 |
| Steering System |
|
| Front wheel steering angle |
45º(L/R) |
| Articulated steering angle |
25º(L/R) |
| Drive type |
Dual action cylinder |
| Axle |
|
| Drive type |
Four wheel drive(6×4) |
| Front axle ground clearance |
630mm |
| Front wheel lean |
17º(L/R) |
| Oscillation |
±15º |
| Drive axle |
Three stages with No-SPIN differential |
| Working Equipment |
|
| Control system |
Hydraulic drive system |
| Hydraulic pump |
Gear pump |
| Control valve |
Two sets, five pieces per set |
| Control pressure |
18MPa |
| Hydraulic oil cylinder |
Dual action cylinder |
| Max. tractive force |
73.5KN |
| Max. lift above ground |
450mm |
| Ground penetration |
500mm |
| Blade width |
3660mm |
| Blade cycling |
360º |
| Max. bank cutting angle |
90º(L/R) |
| Operating weight |
14000kg |
| Braking System |
|
| Service brake |
Hydraulic caliper disc brake actuate 4 rear wheels |
| Parking brake |
Hand operated hoop brake |
| Dimensions |
|
| Overall length |
8500mm |
| Overall width(wheel outside) |
2600mm |
| Overall height |
3500mm |
| Wheel base |
6062mm |
| Front tread |
2150mm |
| Rear tread |
2340mm |
| Tyre size |
17.5-25 |
| Service Capacities |
|
| Fuel tank |
228L |
| Engine crank case |
19L |
| Hydraulic tank |
130L |
| Gear box |
21L |
| Rear axle |
28L |
| Balance box |
23L(each) |
| Worm gear case |
2.5L |
| Tandem Drive |
|
| Type |
Swing type with roller chain transmission |
| Speed ratio |
18.03 |
Why Choose Us
Audited Supplier 
){kind=link}
){kind=link}